Products

 Our Deluxe Snow Pushers feature a full trip edge and free-floating side plates to scrape hard-pack better than a fixed pusher. Deluxe Snow Pushers also feature an oscillating quick attach plate allowing them to follow the contour of the terrain they are running on!  The Deluxe Snow Pusher is made with a full commercial-grade frame and standard ¾” reversible cutting edge.

Available with optional high volume screens and back drag, we will have the pusher to meet all your needs! 

  The Earth Auger drive is built with a heavy-duty commercial-grade frame and has a planetary gearbox direct drive system capable of standing up to years of the harshest abuse possible.

Featuring a 2″ hex drive unit, our Auger is self-centering and offers a variety of bit options making this is the perfect system for not only commercial-grade applications but residential and farm use as well. 

 Our Low Profile Grapple Bucket feature a 3/16” bucket material with 1/2” end caps that have bolt-on removable side plates that remove easily for passing long debris (logs, pipe etc.) through the center of the grapples.

Under strapped with ½” by 2 ½” solid steel bands that tie into and strengthen the mounting plate, these buckets can handle a beating. Our grapples come standard with a hardened ¾” bolt-on, replaceable cutting edge. Like all of our grapples they have fully grease-able pivot points, cylinder covers and enclosed solid grapples.

Dual cylinder grapples open and close together but close to different levels making them ideal for grabbing and holding uneven loads in the bucket. Visibility slots are available for those who require more visibility for digging and brush work with the grapple claws up.
 

This hitch allows you to quickly and easily guide equipment to where you need it without the inconvenience of hooking it up! This attachment works with any trailer including goosenecks! These attachments feature a 23″ receiver tube for maximum reach and ease of use!
 

  2 versions of our dirt buckets; Standard (3/16” bucket material) and Heavy-Duty (1/4”bucket material). Both options feature 5/16″ side plates and 3/4″ by 6″ reversible bolt-on cutting edge.

The HD version is designed for high use, daily abuse such as excavating, road work, farming, municipality or simply if you are incredibly hard on your equipment! The HD version has the option for excavator teeth.

The teeth are welded into the bucket above the cutting edge and are level with the edge so the bucket can still be used to grade smoothly. The cutting edge as well as the teeth can be replaced easily to dramatically increase the life of the bucket!

Both models are under strapped with ½” by 2 ½” solid steel bands that tie into and strengthen the mounting plate as well as a 5″ top channel standard; these buckets can handle a beating.

All of our dirt buckets feature an elongated 36½″ bottom ensuring you have the best visibility of the cutting edge possible from the cab of your machine.

Various skid steer loader mounts are also available for those without universal skid steer quick attach, please call for additional information! 

 Our commercial-grade Brush Mower was designed with versatility in mind. Utilizing high end hydraulic motors into a large gearbox this mower simply cuts better, faster and quieter than others on the market!

The dual swing away blades are capable of hacking down up to 4” diameter material while doing a very nice job on grasses as well. These blades are also easily replaceable and they are affordable.

The deck is constructed of heavy-duty ¼” steel and is completely free floating. This means the mounting plate moves independently of the mower deck making cutting on uneven ground or ditches a breeze.

The back of our mower is designed to be rolled across the ground on a heavy-duty 6” roller standard and the front is picked up with the tilt on the skid steer using two 13,000 lb heavy-duty non-weather rated straps, which takes the shock out of your machine and body. This makes our mowers smoother and quieter than our competitors.

V slots are cut into the deck to help funnel material into the blades as well as allowing the mower to mow up to a fence post or tree without cutting it off. Mower manifolds are designed to bypass fluid should your blades become lodged and the mower comes to an abrupt halt ensuring that you will not damage the mower! This standard flow mower requires 14-25 gallons per minute of flow to run highly effectively!

Optional wheels or push bars are available. 

 Constructed with a heavy-duty full box frame, this Backhoe offers 2 sizes of arm length, 6 ½’ or 8 ½’ to accommodate your specific needs.

With bucket sizes ranging from 9–24” a 17” bucket depth and a 3000 PSI cylinder, we have whatever you need to get the job done! The Jenkins Iron & Steel Backhoe also features a 3/4” cutting edge and replaceable digging teeth.

An optional adjustable mechanical thumb for gripping debris is ideal for whatever you need to move in a hurry! 

 Brush Grapple was designed to take a huge bite out of the time you spend cleaning up brush, logs, roots, large rocks, and concrete.

Featuring a 50” bite powered by twin 3000 PSI cylinders and fish tooth serrations on all of the hardened 3/4″ teeth laterally gusseted with 3/8″ hardened plate, this attachment will grab and hold whatever you need. The bucket is made using a 3/4” Grade 50 steel making it the most durable Brush Grapple on the market.

Built to be commercial-grade, our grapple is designed to rip into roots and tear up the ground with the convenience of replaceable excavator digging teeth. The top grapple also features heavy-duty rectangular tubes and hardened teeth with sheet gusseting.

This grapple also features its mounting plate at an angle so there is plenty of rollback for you to drive around without losing your load. Like all Jenkins grapples, we provide fully grease-able pivot points. This grapple can absolutely handle even the biggest skid steers on the market! 

  The Super Duty Mower is a step up from our standard Brush Mower. Utilizing a direct drive motor, as opposed to the standard gearbox, and a 1/4″ free-floating deck, this mower is ready for any challenge, including trees up to 7″ in diameter. With 4 easy-to-replace blades, a 500 lb flywheel for maximum brush clearing and a standard flow rate of 14-25 GPM, you won’t find another mower like this.

The deck is constructed of heavy-duty 1/4" steel and is completely free floating. This means the mounting plate moves independently of the mower deck, making cutting on the uneven ground or ditches a breeze.

 The back of our mower is designed to be rolled across the ground on a heavy-duty 6" roller standard and the front is picked up with the tilt on the skid steer using two 13,000 lb heavy-duty non-weather rated straps, which takes the shock out of your machine and body. This makes our mowers smoother and quieter than our competitors.

V slots are cut into the deck to help funnel material into the blades as well as allowing the mower to mow up to a fence post or tree without cutting it off. Mower manifolds are designed to bypass fluid should blades become lodged and the mower comes to an abrupt halt ensuring that you will not damage the mower! This standard flow mower requires 14-25 GPM of flow to run highly effectively!

 Debris Grapple is constructed using ½” material with 6″ spacing between the tines which allows dirt and small debris to fall though while holding onto larger loads. The ½” hardened cutting edge provides additional strength and prevents the tines from bending. The Debris Grapple makes it easy to grab and move material. The Debris Grapple also features bolt-on removable side plates.

 Our hydraulic Extendable Boom is the perfect tool for truss installation, building erection, pole setting, roofing and a host of other applications.

Utilizing the speed and efficiency of the skid steer/tractor loader, our commercial-grade, Extendable Boom will save time and money for contractors and farmers over a wide range of applications.

Featuring a retracted length of 10′ with a 6′ hydraulically operated second section and a 4′ manually operated third section you have 20′ of reach just in the boom! All wear pads are UHMW poly and are replaceable and feature full steel gussets on the third section. The Boom use a pintle style hitch for versatility and safety. 

 High Dump Bucket is ideal for any job that requires additional dumping height. From loading dump trucks, to feed mixers, or simply for a more controlled dump of any materials, this bucket is a major time saver!

Using the High Dump Bucket increases your dump height by 51″ and gives you the ability to reach out over the sides of trucks to dump in the middle. The bucket features a 3/4″ reversible bolt-on cutting edge standard, grease-able pivot points, and screening in the back for cutting edge visibility and ease of use! 

 The Ice and Material Scraper makes scraping material off of any solid surface a breeze. Utilizing the skid steer for down pressure, and the ability to move forward and backwards as well as side to side, makes scraping ice, snow, manure or any other hard packed material easy.

Featuring a heavy-duty frame with a replaceable disc and pivoting center point make it simple to use and highly effective for scraping up anything! The disc is self-sharpening for minimal maintenance, maximum longevity, and ease of use!  

 Our Low Profile Grapple Bucket feature a 3/16” bucket material with 1/2” end caps that have bolt-on removable side plates that remove easily for passing long debris (logs, pipe etc.) through the center of the grapples.

Under strapped with ½” by 2 ½” solid steel bands that tie into and strengthen the mounting plate, these buckets can handle a beating. Our grapples come standard with a hardened ¾” bolt-on, replaceable cutting edge. Like all of our grapples they have fully grease-able pivot points, cylinder covers and enclosed solid grapples.

Dual cylinder grapples open and close together but close to different levels making them ideal for grabbing and holding uneven loads in the bucket. Visibility slots are available for those who require more visibility for digging and brush work with the grapple claws up. 

  Quick Attach Plates are available in solid or partial versions both being 5/16″ thick with ½” pin gusseting. Ideal for older or self-made attachments the replacement plates help you hook-up to your machine in no time. 

 Hydraulic Angle Snow Blade is the answer to all of your snow clearing needs! Featuring a full trip blade with dual cylinder hydraulic angle allowing up to a 30° angle, this blade will make short work of any snow fall. Featuring an automatic tilt mounting plate the blade will follow contoured roads allowing for maximum efficiency.

Our adjustable blade height ensures you will not accidentally roll back your sod, or scrape off your class 5 prior to ground freeze. The hardened reversible bolt on the replaceable cutting edge makes this product easy to use and ensures longevity.

These blades are hydraulically protected through a breakaway manifold; if you are plowing at an angle and catch an edge, it will allow the blade to come back to center without hurting the attachment. 

 Dig out stubborn rocks and stumps easily using the power and torque of your skid steer! The Big Z Stump Bucket is a 64” serrated tooth attachment, constructed entirely of ½” material.

With the ability to dig into the ground with a sawing motion, this attachment will get any job done quick and easy. The Stump Bucket’s teeth are replaceable for increased wear. 

 Pick Up Broom will make short work out of all of your indoor and outdoor cleanup projects.

Featuring an Eaton Char-Lynn Hydraulic motor, 28″ steel and poly combination bristles, a full-length pivot shaft that is fully grease-able and a commercial-grade bucket with a 3/4″ standard reversible, replaceable, bolt-on cutting edge. The bristle height is fully adjustable for longevity and the rubber front and side shrouds allow for dust and debris control. 

 The Tine Grapple, sometimes referred to as a manure fork or silage fork, is an extremely versatile attachment. From digging out roots and stumps to piling up brush, breaking up silage, and scraping up the barn floor, this grapple can do it all.

Constructed with 2 ¼” hardened replaceable 34 1/2” tines, these commercial-grade grapples are as heavy-duty as you can get in a round tine model, and if you do get into trouble, one bolt removes the damaged shaft for easy replacement.

4 1/4″ spacing between the tines ensures large debris will fall through easily. Like all grapples, they have fully grease-able pivot points, cylinder covers and enclosed grapples. Dual cylinder grapples open and close together but close to different levels making them ideal for gripping and holding uneven loads in the bucket. All Big Z hydraulic attachments come with hoses, cylinders and flat face couplers. 

  The Hydraulic Angle Winged Snow Blade features an oscillating quick attach plate to follow the contours of the ground, as well as forward oscillation for better surface contact. The two 2’ hydraulic wings are independently controllable allowing you to use the pusher as a large angle blade, fold one wing in and have a stop preventing snow from leaking around the side or fold both wings in for a full pusher effect!

All wing blades have a full ¾” reversible, replaceable, bolt-on hardened cutting edge for max wear and adjustable shoes.